Call us on 01226 380779  |

Call us on 01226 380779  |


Channels & Fixings range.

These products allow vertical movement whilst offering horizontal restraint.

The channel system tends to be face-fixed whilst the slot is usually cast into concrete. These systems may be used to overcome differences in coursing between masonry leaves.The products in this section offer the end-user the ability to connect our restraint products to various substrates, metalwork and timbers. Selection of the correct product depends on the application and strengths required for the overall strength of our products in situ. Careful consideration should be given to ensure the right fixing is used.

The Restraint Channel System effectively ties an outer masonry leaf to light steel, concrete or timber frame through insulation. It allows vertical movement at the same time as offering lateral restraint. The system comprises stainless steel channels, wall ties, fixings and compression sleeves (for use when fixing to concrete, timber and large insulation thicknesses).

The steel frame channel system is designed to tie brickwork to steel studding. self-drill / self-tap screws fix through the channel and insulation into the steel studding.

Cast in dovetail slot, available in stainless steel, pre filled with polystyrene (to prevent concrete ingress). Used in conjunction with ties to restrain brickwork.

28/15 slotted and holed channel for surface fixing. Slots and holes repeat every 75mm to ensure a fixing point is available along the entire length. Various fixings can be used in conjunction with ties to restrain brickwork. (see fixing section).

The universal head enables this tie to be used with all V60 channel systems and V29 slot to restrain brickwork supplied with a drip to prevent the passage of moisture across cavity. Drip positioned 90mm from safety end as standard.

Vista offer a range of self drill screws designed for use when fixing products to steel work. The high quality self drilling fastener is designed to give very rapid and accurate installation with precision drill points eliminating ‘skipactions’ to prevent damage to the face of the profile. Also available double threaded for our SFC system.

Cost effective solution for fast repetitive fixing into concrete and similar materials. Available in both stainless steel and zinc plated. Ideal for fixing products to a solid base material, these are easy to install and are used extensively for fixing of our products. Suitable for concrete, solid blocks, perforrated bricks, hollow blocks and airated concrete (aircrete). This hammer fixing is simply tapped in with a hammer – easy. Available in stainless steel or zinc plated.

When fixing a stainless steel tie to a mild steel frame, an isolation pad should be used to separate the dissimilar metals and prevent a bimetallic reaction.

Vista offer high performance Epoxy Acrylate Resin suitable for using along with our remedial ties. All ties are supplied with one mixer nozzle. The resin gun is a high quality resin applicator which can be used more than once.

Available to suit the Vista range of cast-in or surface fixed channels, our T-head bolts are manufactured from either stainless steel or hot dip galvanised steel and come in a variety of lengths and thread diameters to suit your requirements.

Contact Us

Get In Touch.

For more information, please call us on 01226 380779
or email